E3T-SL13-2
| Parameters | |
|---|---|
| Sensing Distance | 0.197 ~ 0.591 (5mm ~ 15mm) ADJ |
| Sensing Method | Reflective, Convergent |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM |
| Light Source | Red (650nm) |
| Output Range | 50mA |
| Measurement Range-Max | 15 mm |
| Measurement Range-Min | 5 mm |
| Body Height | 24.5mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
| Surface Mount | NO |
| Mounting Feature | PANEL MOUNT |
| Operating Temperature | -25°C~55°C |
| Published | 2015 |
| Series | E3T |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Wire |
| Additional Feature | IP 67, REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Reach Compliance Code | unknown |
| Body Length or Diameter | 11mm |
| Body Breadth | 7 mm |
| Output Type | ANALOG CURRENT |
| Output Configuration | PNP - Open Collector/Light-ON |
| Response Time | 1ms |
E3T-SL13-2 Overview
It is recommended that the photoelectric sensor is set at -25°C~55°C to ensure reliable performance. In order for these electronic components to function, the voltage should be set to 12V~24V within the circuit or system. A photoelectric sensor should have a response time of 1ms.
E3T-SL13-2 Features
Sensing Distance: 0.197 ~ 0.591 (5mm ~ 15mm) ADJ
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3T Series
E3T-SL13-2 Applications
There are a lot of Omron Automation and Safety E3T-SL13-2 Photoelectric Sensors applications.
- Detecting colours
- Luminescence sensors
- Contrast sensors
- Material handling
- Counting small objects
- detect objects
- Zone scanners
- Logistics and materials handling
- Pharmaceutical industry
- Monitoring bigger areas for objects with light grids
