E3T-ST12
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Brackets, Screw |
| Number of Pins | 4 |
| Weight | 40g |
| Operating Temperature | -25°C~55°C |
| Published | 2000 |
| Series | E3T |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Approval Agency | CE |
| Output Configuration | NPN - Open Collector/Dark-ON |
| Output Current | 50mA |
| Rise Time | 1ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Cable |
| Light Source | Red (650nm) |
| Min Supply Voltage (DC) | 12V |
| Height | 7.11mm |
| Length | 18.5mm |
| Width | 9.4mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Ratings | IP67 |
E3T-ST12 Overview
Ensure reliable performance by setting the photoelectric sensor's temperature to -25°C~55°C. To make these electronic components function, they should receive a voltage of 12V~24V. This photoelectric sensor can only function properly if the 4 pins are connected. It needs a current of 50mA at the output to work. Photoelectric sensors can be damaged by voltages up to 24V in DC circuits. As low a voltage as possible, such as 0 volts, can be used for this photoelectric sensor.
E3T-ST12 Features
Sensing Distance: 39.370 (1m)
4 pins
Operating Temperature: -25°C~55°C
E3T Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
E3T-ST12 Applications
There are a lot of Omron Automation and Safety E3T-ST12 Photoelectric Sensors applications.
- Zone scanners
- Pharmaceutical industry
- Mechanical engineering
- Checking objects on production lines or conveyors
- Automatic doors
- Automotive industry
- Luminescence sensors
- Entrance and gate
- Logistics and materials handling
- Counting small objects
