E3T-ST12R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Number of Pins | 4 |
| Operating Temperature | -25°C~55°C |
| Published | 2002 |
| Series | E3T |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Cable |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Max Supply Voltage | 26.4V |
| Min Supply Voltage | 10.8V |
| Output Configuration | NPN - Open Collector/Dark-ON |
| Response Time | 1ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Through-Beam |
| Connection Method | Cable |
| Light Source | Red (650nm) |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3T-ST12R Overview
The temperature of the photoelectric sensor should be set to -25°C~55°C to ensure reliable performance. For these electronic components to work, the voltage should be provided by 12V~24V. Sensors with a response time of 1ms are considered ideal. To maintain reliability, the photoelectric sensor works at a minimum temperature of -25°C. It is possible to operate reliably at a maximum operating temperature of 55°C. This photoelectric sensor can only function properly if the 4 pins are connected.
E3T-ST12R Features
Sensing Distance: 39.370 (1m)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3T Series
E3T-ST12R Applications
There are a lot of Omron Automation and Safety E3T-ST12R Photoelectric Sensors applications.
- Entrance and gate
- Monitoring bigger areas for objects with light grids
- Checking objects on production lines or conveyors
- Contrast sensors
- Material handling
- Measuring distance
- Passive infrared sensors
- Luminescence sensors
- Counting small objects
- detect objects
