E3T-ST14
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Brackets, Screw |
| Number of Pins | 4 |
| Operating Temperature | -25°C~55°C |
| Published | 2002 |
| Series | E3T |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Output Configuration | PNP - Open Collector/Dark-ON |
| Output Current | 50mA |
| Response Time | 1ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Through-Beam |
| Load Current | 50mA |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Cable |
| Light Source | Red (650nm) |
| Min Supply Voltage (DC) | 12V |
| Width | 7mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3T-ST14 Overview
To maintain reliable performance, the photoelectric sensor should have a temperature of -25°C~55°C. For these electronic components to function, they require a voltage of 12V~24V to be applied to a circuit or system. It is generally considered that photoelectric sensors have a response time of 1ms. It's important to connect 4 pins for the photoelectric sensor to work. It is required that the output current of a photoelectric sensor be 50mA. There is no damage to the photoelectric sensor when applied a voltage of 24V in a DC circuit. At low voltages, such as 12V, this photoelectric sensor is capable of working.
E3T-ST14 Features
Sensing Distance: 39.370 (1m)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3T Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
E3T-ST14 Applications
There are a lot of Omron Automation and Safety E3T-ST14 Photoelectric Sensors applications.
- Automatic doors
- Measuring distance
- Detecting colours
- Counting small objects
- Pharmaceutical industry
- Passive infrared sensors
- Monitoring bigger areas for objects with light grids
- Automotive industry
- Material handling
- Entrance and gate
