E3Z-D66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Number of Pins | 4 |
| Housing Material | Polybutylene |
| Operating Temperature | -30°C~55°C |
| Packaging | Bulk |
| Published | 2001 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Output Type | ANALOG CURRENT |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Turn On Delay Time | 1 ms |
| Response Time | 1000 μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 0.197 ~ 3.937 (5mm ~ 100mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Connector |
| Light Source | Infrared (860nm) |
| Min Supply Voltage (DC) | 12V |
| Output Range | 100mA |
| Measurement Range-Max | 100 mm |
| Measurement Range-Min | 5 mm |
| Height | 33.2mm |
| Length | 20mm |
| Width | 10.8mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3Z-D66 Overview
The temperature of the photoelectric sensor should be set to -30°C~55°C to ensure reliable performance. In order for these electronic components to work, their voltage must be set to 12V~24V. A response time of 1000 μs is considered ideal for photoelectric sensors. To make the photoelectric sensor work properly, 4 pins must be connected. Photoelectric sensors need 100mA at their outputs to work. The maximum voltage of 24V in DC circuit can be applied to the photoelectric sensor without damage. Using a voltage as low as possible, such as 12V, this photoelectric sensor can operate. Bulk comes with the sensor.
E3Z-D66 Features
Sensing Distance: 0.197 ~ 3.937 (5mm ~ 100mm) ADJ
4 pins
Response Time: 1000 μs
Operating Temperature: -30°C~55°C
E3Z Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
E3Z-D66 Applications
There are a lot of Omron Automation and Safety E3Z-D66 Photoelectric Sensors applications.
- Checking objects on production lines or conveyors
- Counting small objects
- Automotive industry
- detect objects
- Mechanical engineering
- Measuring distance
- Logistics and materials handling
- Luminescence sensors
- Entrance and gate
- Material handling
