E3Z-L66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Surface Mount | NO |
| Mounting Feature | BOARD MOUNT |
| Number of Pins | 4 |
| Operating Temperature | -25°C~55°C |
| Published | 2001 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Reach Compliance Code | unknown |
| Body Length or Diameter | 20mm |
| Body Breadth | 10.8 mm |
| Output Type | ANALOG CURRENT |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Response Time | 1ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 3.543 (90mm) |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Connection Method | Connector |
| Light Source | Red (650nm) |
| Output Range | 100mA |
| Measurement Range-Max | 120 mm |
| Measurement Range-Min | 60 mm |
| Body Height | 31mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3Z-L66 Overview
For reliable performance, set the temperature of the photoelectric sensor to -25°C~55°C. It's important that 12V~24V is applied to the circuit or system for these components to work. A photoelectric sensor is considered ideal if its response time is 1ms. To make a photoelectric sensor work, 4 pins must be connected.
E3Z-L66 Features
Sensing Distance: 3.543 (90mm)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3Z Series
E3Z-L66 Applications
There are a lot of Omron Automation and Safety E3Z-L66 Photoelectric Sensors applications.
- Counting small objects
- Zone scanners
- Entrance and gate
- Logistics and materials handling
- Monitoring bigger areas for objects with light grids
- Automatic doors
- Detecting colours
- Checking objects on production lines or conveyors
- Pharmaceutical industry
- Contrast sensors
