E3Z-LS68
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Surface Mount | NO |
| Mounting Feature | BOARD MOUNT |
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -25°C~55°C |
| Published | 2005 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Body Length or Diameter | 20mm |
| Body Breadth | 10.8 mm |
| Output Type | ANALOG CURRENT |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Response Time | 1ms |
| Adjustment Type | Five-Turn Endless Adjuster |
| Sensing Distance | 0.787 ~ 3.150 (20mm ~ 80mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Connection Method | Connector |
| Light Source | Red (650nm) |
| Output Range | 100mA |
| Measurement Range-Max | 80 mm |
| Measurement Range-Min | 2 mm |
| Body Height | 31mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3Z-LS68 Overview
It is recommended that the photoelectric sensor is set at -25°C~55°C to ensure reliable performance. For these electronic components to work, the voltage should be provided by 12V~24V. The ideal response time for a photoelectric sensor is 1ms. To make the photoelectric sensor work properly, 4 pins must be connected.
E3Z-LS68 Features
Sensing Distance: 0.787 ~ 3.150 (20mm ~ 80mm) ADJ
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3Z Series
E3Z-LS68 Applications
There are a lot of Omron Automation and Safety E3Z-LS68 Photoelectric Sensors applications.
- Measuring distance
- Counting small objects
- detect objects
- Detecting colours
- Contrast sensors
- Automotive industry
- Mechanical engineering
- Checking objects on production lines or conveyors
- Luminescence sensors
- Passive infrared sensors
