Parameters |
Factory Lead Time |
1 Week |
Surface Mount |
NO |
Mounting Feature |
BOARD MOUNT |
Number of Pins |
4 |
Housing Material |
PBT |
Operating Temperature |
-25°C~55°C |
Published |
2004 |
Series |
E3Z |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Additional Feature |
IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
Voltage - Supply |
12V~24V |
Ingress Protection |
IEC IP67 |
Body Length or Diameter |
20mm |
Body Breadth |
10.8 mm |
Output Type |
ANALOG CURRENT |
Output Configuration |
PNP - Dark-ON/Light-ON - Selectable |
Output Current |
100mA |
Max Voltage Rating (DC) |
24V |
Turn On Delay Time |
1 ms |
Response Time |
1000 μs |
Adjustment Type |
Five-Turn Endless Adjuster |
Sensing Distance |
0.787 ~ 7.874 (20mm ~ 200mm) ADJ |
Sensing Method |
Reflective, Diffuse |
Sensors/Transducers Type |
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
Max Supply Voltage (DC) |
24V |
Connection Method |
Connector |
Light Source |
Red (680nm) |
Min Supply Voltage (DC) |
12V |
Output Range |
100mA |
Measurement Range-Max |
200 mm |
Measurement Range-Min |
20 mm |
Body Height |
31mm |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Ratings |
IP67 |
E3Z-LS86 Overview
For reliable performance, the temperature of the photoelectric sensor should be set to -25°C~55°C. If these electronic components are to work, they should receive 12V~24V voltage into the circuit or system. Photoelectric sensors have an ideal response time of 1000 μs. The photoelectric sensor must have the 4 pins connected to work properly. Photoelectric sensors require an output current of 100mA to operate. A photoelectric sensor can be operated at a maximum voltage of 24V in a DC circuit without damage occurring. Photoelectric sensors work at as low a voltage as possible, for example 12V. As a rule of thumb, photoelectric sensors operate with maximum voltages of zero.
E3Z-LS86 Features
Sensing Distance: 0.787 ~ 7.874 (20mm ~ 200mm) ADJ
4 pins
Response Time: 1000 μs
Operating Temperature: -25°C~55°C
E3Z Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
E3Z-LS86 Applications
There are a lot of Omron Automation and Safety E3Z-LS86 Photoelectric Sensors applications.
- Pharmaceutical industry
- Luminescence sensors
- Zone scanners
- Entrance and gate
- Checking objects on production lines or conveyors
- detect objects
- Monitoring bigger areas for objects with light grids
- Logistics and materials handling
- Passive infrared sensors
- Material handling