E3Z-LT66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Desktop |
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -25°C~55°C |
| Published | 2006 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Reach Compliance Code | unknown |
| Body Length or Diameter | 20mm |
| Body Breadth | 10.8 mm |
| Output Type | NPN |
| Termination Type | WIRE/CONNECTOR |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 1ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 2362.2 (60m) 196.85' |
| Sensing Method | Through-Beam |
| Connection Method | Cable |
| Light Source | Red (655nm) |
| Measurement Range-Max | 60000 mm |
| Body Height | 33.1mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3Z-LT66 Overview
In order for the photoelectric sensor to work reliably, it should be set to -25°C~55°C degrees Celsius. Circuits or systems that use these components should have a voltage of 12V~24V. An ideal response time for photoelectric sensors is 1ms. It's important to connect 4 pins for the photoelectric sensor to work. It is required that the output current of a photoelectric sensor be 100mA.
E3Z-LT66 Features
Sensing Distance: 2362.2 (60m) 196.85'
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3Z Series
E3Z-LT66 Applications
There are a lot of Omron Automation and Safety E3Z-LT66 Photoelectric Sensors applications.
- Luminescence sensors
- Checking objects on production lines or conveyors
- Mechanical engineering
- Measuring distance
- Counting small objects
- Zone scanners
- detect objects
- Monitoring bigger areas for objects with light grids
- Passive infrared sensors
- Contrast sensors
