Parameters |
Factory Lead Time |
1 Week |
Mount |
Screw |
Number of Pins |
4 |
Housing Material |
PBT |
Operating Temperature |
-25°C~55°C |
Published |
2004 |
Series |
E3Z |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Wire |
Additional Feature |
IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
Voltage - Supply |
12V~24V |
Ingress Protection |
IEC IP67, IP69K |
Reach Compliance Code |
unknown |
Output Type |
ANALOG CURRENT |
Operating Supply Voltage |
24V |
Output Configuration |
PNP Transistor |
Cable Length |
2m |
Response Time |
1ms |
Adjustment Type |
Single-Turn |
Sensing Distance |
15m |
Sensing Method |
Through-Beam |
Connection Method |
Cable |
Light Source |
Infrared (870nm) |
Output Range |
100mA |
Measurement Range-Max |
10000 mm |
Height |
20mm |
Length |
33.1mm |
Width |
10.8mm |
RoHS Status |
RoHS Compliant |
Ratings |
IP67 |
E3Z-T81A Overview
The temperature of photoelectric sensor should be set to -25°C~55°C to ensure reliable performance. To make these electronic components work, they should be supplied with 12V~24V voltage. For photoelectric sensors, 1ms is ideal. 4 pins must be connected for the photoelectric sensor to work. Photoelectric sensors should have their supply voltage set to 0.
E3Z-T81A Features
Sensing Distance: 15m
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3Z Series
E3Z-T81A Applications
There are a lot of Omron Automation and Safety E3Z-T81A Photoelectric Sensors applications.
- Checking objects on production lines or conveyors
- Luminescence sensors
- Entrance and gate
- Measuring distance
- Zone scanners
- Counting small objects
- Automatic doors
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Material handling