E3ZM-T66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Number of Pins | 4 |
| Housing Material | Stainless Steel |
| Operating Temperature | -25°C~55°C |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Reach Compliance Code | unknown |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN |
| Output Current | 100mA |
| Turn On Delay Time | 1 ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 15m |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (870nm) |
| Min Supply Voltage (DC) | 10V |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3ZM-T66 Overview
The temperature of photoelectric sensor should be set to -25°C~55°C to ensure reliable performance. Electronic components should be connected to a circuit or system by 10V~30V voltage. The photoelectric sensor must be connected to 4 pins in order to function properly. Photoelectric sensors must operate with an output current of 100mA. There is no damage to the photoelectric sensor if the maximum voltage of 30V is applied to the DC circuit. As low a voltage as possible can be applied to this photoelectric sensor, such as 10V. Optimal performance can be achieved by setting the supply voltage of the photoelectric sensor to zero.
E3ZM-T66 Features
Sensing Distance: 15m
4 pins
Operating Temperature: -25°C~55°C
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 1 ms
E3ZM-T66 Applications
There are a lot of Omron Automation and Safety E3ZM-T66 Photoelectric Sensors applications.
- Contrast sensors
- Luminescence sensors
- Logistics and materials handling
- Zone scanners
- Counting small objects
- Measuring distance
- Detecting colours
- Automatic doors
- detect objects
- Automotive industry
