E5130A-DIT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Packaging | Bulk |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 11 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -20°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | UPPER |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 4 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 11 |
| JESD-30 Code | R-XUUC-N11 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Max Output Current | 13mA |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 1.1V |
| Output Current per Channel | 12mA |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Turn On Time | 0.15 µs |
| Output Peak Current Limit-Nom | 0.013A |
| Turn Off Time | 0.15 µs |
| Output Current Flow Direction | SOURCE SINK |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
E5130A-DIT Overview
Bulk-shaped packaging is used.In total, it has 11 terminations.Its terminal position is UPPER.A total of 11 pins are present on it.High efficiency can be achieved when the supply voltage is 1.5V.Peripheral Drivers contains this gadget all by itself.Positioned in direction of Surface Mount, it is at a right angle.For stable operation, the maximum operating temperature should be 70°C°C.Hot-swappable device operates at a minimum temperature of -20°C degrees Celsius in order to ensure reliabilHot-swappable devicey.Normally, Vsup should remain above 1.1V.In the Vsup (maximum supply voltage) setting, 3.6V is selected.The power supply of the part is referred to as 1.5V.By default, it produces output 4.Consequently, 13mA is the maximum output current that can be achieved to meet the operation criteria.Hot Swap has 25mOhm resistance.
E5130A-DIT Features
The terminal position of 11
E5130A-DIT Applications
There are a lot of Atmel (Microchip Technology) E5130A-DIT hot swap controllers applications.
- Temperature monitor output
- Safe board insertion and extraction
- Active current limit
- Limitting the inrush current
- Loads
- USB interface
- Undervoltage protection
- DC boost circuit
- Automotive circuits
- Switch
