Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
Nonstandard SMD |
Surface Mount Land Size |
0.311Lx0.209W 7.90mmx5.30mm |
Operating Temperature |
-40°C~105°C |
Packaging |
Tape & Reel (TR) |
Published |
1998 |
Series |
SP-Cap CB |
Size / Dimension |
0.311Lx0.209W 7.90mmx5.30mm |
Tolerance |
±20% |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-40°C |
Applications |
General Purpose |
Voltage - Rated |
12.5V |
Capacitance |
4.7μF |
Voltage - Rated DC |
12.5V |
Lifetime @ Temp |
1000 Hrs @ 105°C |
Life (Hours) |
1000 hours |
Height |
3.3mm |
Height Seated (Max) |
0.130 3.30mm |
Length |
7.8994mm |
Width |
5.3086mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
The capacitance can run at the range of 4.7μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Nonstandard SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to SP-Cap CB series. This part is mounted in the way of Surface Mount. The type of the ECG-C1BA4R7R capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -40°C~105°C. Panasonic Electronic Components ECG-C1BA4R7R ECG-C1BA4R7R Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 12.5V. ECG-C1BA4R7R Capacitor. Voltage - Rated often has values of 12.5V. This device's minimum working temperature must not be less than -40°C. It's recommended that you utilize it when the temperature is below 105°C.
SP-Cap CB Series
Capacitance: 4.7μF
Tolerance: ±20%
Package / Case: Nonstandard SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -40°C~105°C
There are great quantities of applications of ECG-C1BA4R7R Aluminum Polymer Capacitors.
Typically, ECG-C1BA4R7R is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Line Buffering
- To reduce power noise & signal noise
- Audio Crossover
- Coupling or blocking
- Signal decoupling & power bypass
- Spot Welding
- UPS Buffering
- Motor Control
- DC Link
- Motor Start