EFR32MG13P732F512GM32-D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Series | Mighty Gecko |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | TxRx + MCU |
| Voltage - Supply | 1.8V~3.8V |
| Frequency | 2.4GHz~2.4835GHz |
| Memory Size | 512kB Flash 64kB RAM |
| Protocol | Bluetooth v5.0, Thread, Zigbee® |
| Power - Output | 19dBm |
| RF Family/Standard | 802.15.4, Bluetooth |
| Sensitivity | -103.3dBm |
| Data Rate (Max) | 2Mbps |
| Serial Interfaces | I2C, I2S, SPI, IrDA, UART, USART |
| Current - Receiving | 8.4mA~14mA |
| Current - Transmitting | 8.5mA~134.3mA |
| Modulation | 2-FSK, 4-FSK, ASK, BPSK, DBPSK, DSSS, GFSK, GMSK, MSK, OOK, O-QPSK |
| GPIO | 16 |
EFR32MG13P732F512GM32-D Overview
There is also a 32-VFQFN Exposed Pad package that RF transceiver IC is used to save space on the board. As a RF transceiver's mounting method, Surface Mount is used.When transceiver RF emerges as a TxRx + MCU, it performs extremely well and is highly reliable.As you can see, this RF transceiver comes from the well-known Mighty Gecko series of products.RF transceiver operates on the basis of the frequency of 2.4GHz~2.4835GHz.
EFR32MG13P732F512GM32-D Features
32-VFQFN Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Mighty Gecko series
EFR32MG13P732F512GM32-D Applications
There are a lot of Silicon Labs EFR32MG13P732F512GM32-D RF Transceiver ICs applications.
- Receive
- Smart Meters
- Retail
- Remote Control
- Chemical Sensors
- Automotive
- Low Noise Amplifier (LNA)
- Health care
- Remote Device Management
- Security Systems
