EL4543IUZ-T7
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 350MHz |
| Gain Bandwidth Product | 350MHz |
| Differential Output | YES |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Characteristics | DIFFERENTIAL |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 350MHz |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 3 |
| Min Dual Supply Voltage | 2.5V |
| Interface Standard | GENERAL PURPOSE |
| Height Seated (Max) | 1.7272mm |
| Length | 8.6614mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Line Driver or Receivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 14.5mA |
| Nominal Supply Current | 16.2mA |
| Slew Rate | 1000 V/μs |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 10μA |
| Output Current per Channel | 60mA |
EL4543IUZ-T7 Overview
The linear amplifier is packaged in a QSOP case which makes it easy for the consumer to handle. There have been a total of 24 terminations over the past year. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Line Driver or Receivers op amp ic can be identified by the fact that this is a type of Line Driver or Receivers device. It has 24 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. The buffer amplifier is capable of operating from a supply current of 14.5mA . The op amp ic has 3 channels on it. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. It is recommended that op amp be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 9V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 12V. To keep the buffer amps' supply voltage higher than 5V. In order to conduct this part, you will need to provide dual supply voltages of 6V volts. It is possible to classify the electrical part as LINE DRIVER in terms of its interface IC type.
EL4543IUZ-T7 Features
supply voltage of 5V
EL4543IUZ-T7 Applications
There are a lot of Intersil (Renesas Electronics America) EL4543IUZ-T7 Instrumentational OP Amps applications.
- High speed sample
- Home audio systems
- Information processing
- Signal operation
- Industrial applications including automation
- Image computer boards
- High gain DC amplifier
- Measurements of Wheatstone bridge
- Micro signal measurement
- Wireless base stations
