EL5378IUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 12.5mA |
| Nominal Supply Current | 42mA |
| Slew Rate | 1000 V/μs |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 14μA |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 1.9mV |
| Bandwidth | 700MHz |
| Gain Bandwidth Product | 350MHz |
| Differential Output | YES |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Input Characteristics | DIFFERENTIAL |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 700MHz |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 3 |
| Min Dual Supply Voltage | 2.375V |
| Interface Standard | GENERAL PURPOSE |
| Negative Supply Voltage-Nom | -5V |
| Out Swing-Min | 7.2 V |
| Height Seated (Max) | 1.7272mm |
| Length | 9.906mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EL5378IUZ Overview
The linear amplifier is packaged in a QSOP case. The op amp is delivered to you in a Bulk case. In recent months, the number of terminations has approached 28. The total number of pins on linear amplifier is 28. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Line Driver or Receivers op amps in this case, and this device falls into one of them. Linear amplifier includes 28 pins. Regarding input offset voltage, buffer amplifier rates 1.9mV voltage. Using an 12.5mA supply current, this operational amplifier ics can be operated. Instrumentation amplifier has 3 channels on it. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 85°C. The operating supply voltage of instrumentation amplifier is rated 9V voltage. With regard to the supply voltage, this electrical component is capable of working from under 11V. To keep the buffer amps' supply voltage higher than 4.75V. It is recommended that you conduct this electronic part using the dual supply voltage of 5.5V. A LINE DRIVER interface IC can be found on the electric part.
EL5378IUZ Features
28 Pins
supply voltage of 5V
EL5378IUZ Applications
There are a lot of Intersil (Renesas Electronics America) EL5378IUZ Instrumentational OP Amps applications.
- Scintillation detectors
- Computer workstations
- Vehicle electronics
- Video data acquisition
- Inverse/same-phase proportional circuit
- Video amplifiers
- Industrial applications including automation
- Power transmission
- Division circuits
- Subtraction operation circuits
