EL7154CNZ
| Parameters | |
|---|---|
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 1 |
| Negative Supply Voltage-Nom | -3V |
| Output Peak Current Limit-Nom | 4A |
| Supply Voltage1-Nom | 12V |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 5.334mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 1.05W |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 4A |
| Turn On Delay Time | 25 ns |
| Voltage - Output | 15.5V |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 25 ns |
EL7154CNZ Overview
The PDIP package provides greater flexibility.Configuration is based on 1 drivers.Mosfet driver is based on 8 terminations.Mosfet driver is mounted using the Through Hole method.As a result, it is configured with 8 pins when it is designed.This device operates with 12V supply voltage.Its interface IC is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.Mosfet driver is possible to achieve a maximum output current of 4A.There are various useful electronic components in its subcategory Other Interface ICs.Mosfet driver is based on a basis of 2 outputs that have been integrated.There is a maximum value of 85°C for the allowable operating temperature.Temperatures below -40°C are allowed as the minimum.If you want a stable supply current, you should keep it at 2.5mA.This device operates at its maximum voltage of 16V.The supply voltage of 4.5V is its minimum value for operation.Mosfet gate drivers outputs a current of 4A at the moment.Mosfet driver ic works wMosfet driver ich the output voltage of 15.5V.
EL7154CNZ Features
1 drivers
8 pins
EL7154CNZ Applications
There are a lot of Intersil (Renesas Electronics America) EL7154CNZ gate drivers applications.
- Isolated Supplies for Motor Control
- Portable Media Players
- serial peripheral interface (SPI), I2C
- Video amplifiers
- Portable computers
- Commercial air-conditioning (CAC)
- Motor controllers
- Commercial and agricultural vehicles (CAV)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
