EL7155CSZ-T13
| Parameters | |
|---|---|
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Current - Output | 3.5A |
| Turn On Delay Time | 12 ns |
| Output Current per Channel | 200mA |
| Rise Time | 17ns |
| Fall Time (Typ) | 17 ns |
| Turn-Off Delay Time | 11.5 ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Number of Drivers | 1 |
| Negative Supply Voltage-Nom | -5V |
| Output Peak Current Limit-Nom | 3.5A |
| Output Current Flow Direction | SOURCE SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2.7Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.5A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 16.5V |
EL7155CSZ-T13 Overview
The SOIC package offers greater flexibility.This device is equipped with 1 drivers for its configuration.The configuration is based on 8 terminations.The device is mounted with Surface Mount.A total of 8 pins are available on the device.With a supply voltage of 5V, it is designed to operate.There is an interface IC called HALF BRIDGE BASED PERIPHERAL DRIVER that is employed in this device.An output current as high as 3.5A can be achieved at maximum power.This subcategory of Other Interface ICs has a number of useful electronic components.On the board, there are 8 component pins.Mosfet driver is based on a basis of 2 outputs that have been integrated.There is a maximum value of 85°C for the allowable operating temperature.There is a minimum operating temperature of -40°C.Mosfet gate drivers is recommended that you keep the supply current at 3mA in order to achieve greater stabilMosfet gate driversy.During operation, the supply voltage of 16.5V is its maximum value.Its minimum operating voltage is 4.5V.Mosfet gate drivers is outputting a current of 3.5A.As far as the resistance is concerned, it works with a resistance of 2.7Ohm.
EL7155CSZ-T13 Features
1 drivers
8 pins
Resistance of 2.7Ohm
EL7155CSZ-T13 Applications
There are a lot of Intersil (Renesas Electronics America) EL7155CSZ-T13 gate drivers applications.
- Motor controllers
- Telecom switch mode power supplies
- Power factor correction (PFC) circuits
- Motor Drives
- Head-up and Head mounted displays
- Motor Control
- Automotive Applications
- High current laser/LED systems
- Industrial Motor Inverter - Power Tools, Robotics
- Uninterruptible Power Supplies (UPS)
