EP11SD1ABE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | Gold |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole, Right Angle |
| Housing Material | Nylon |
| Actuator Material | Glass, Nylon, Polyester, Thermoplastic |
| Operating Temperature | -30°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EP |
| Feature | Epoxy Sealed Terminals |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | PC Pins |
| Type | Standard |
| Number of Positions | 2 |
| Color | Red |
| Power Rating | 400mW |
| Voltage - Rated DC | 20V |
| Current Rating (Amps) | 0.4VA AC/DC |
| Orientation | Right Angle |
| Ingress Protection | IP57 - Dust Protected, Waterproof |
| Current Rating | 20mA |
| Termination Style | PC Pin |
| Voltage - Rated AC | 20V |
| Approval Agency | CSA, UL |
| Lead Pitch | 4.7mm |
| Actuator Type | Round, Plunger |
| Circuit | SPST-NO |
| Switch Function | Off-Mom |
| Contact Resistance | 20mOhm |
| Insulation Resistance | 9Ohm |
| Color - Actuator/Cap | Black |
| Max Voltage Rating (AC) | 20V |
| Electrical Life | 60,000 Cycles |
| Number of Poles | 1 |
| Throw Configuration | SPST |
| Max Voltage Rating (DC) | 20V |
| Contact Current Rating | 400mA |
| Length | 8.13mm |
| Width | 8.13mm |
| Actuator Length | 5.46mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Flammability Rating | UL94 V-0 |
| Lead Free | Lead Free |
| Ratings | IP57, Waterproof |
See Relate Datesheet
