EP1C6F256I7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 2007 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 1mm |
| Frequency | 320.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Number of Outputs | 185 |
| Operating Supply Voltage | 1.5V |
| Power Supplies | 1.51.5/3.3V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 1.575V |
| Min Supply Voltage | 1.425V |
| Memory Size | 11.3kB |
| Number of I/O | 185 |
| RAM Size | 11.3kB |
| Frequency (Max) | 250MHz |
| Organization | 640 CLBS |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 5980 |
| Number of Logic Blocks (LABs) | 598 |
| Speed Grade | 7 |
| Number of Registers | 9999 |
| Number of CLBs | 640 |
| Height | 1.8mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EP1C6F256I7N Overview
There are two packages that contain fpga chips: FBGA package and X package. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. A total of 185 I/Os allow data to be transferred in a more coherent manner. In order to construct a fundamental building block, 5980 logic elements/cells are required. In order to operate fpga chips, a voltage supply of 1.5V volts is required. There is a Field Programmable Gate Arrays family component in this FPGA part. In this device, there are 185 outputs that can be used. There are a total of 256 terminations. For the program to work properly, the RAM si11.3kBe of this FPGA module must reach 11.3kB GB in order to ensure normal operation. In order to make it work, 256 pins have been designed. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. A 1.5V-volt supply allows designers to fully utilize its flexibility. Powered by a 1.51.5/3.3V power supply, it can be operated by almost anyone. A maximum operating temperature of 100°C can be reached by this module. Fpga electronics is recommended that the operating temperature be higher than -40°C. The device has a total of 256 pins on fpga semiconductor. The basic building block of the system is composed of 598 logic blocks (LABs). Data and programs can be stored in this FPGA module's 11.3kB memory. There are 9999 registers used to store and transfer data. 640 CLBs are basic modules used for its architecture. A frequency of 320.1MHz provides high efficiency. A maximum supply voltage of 1.575V can be applied to this product. As long as the supply voltage is at least 1.425V, it is able to work properly. Fpga semiconductor is estimated that this FPGA can operate at a maximum frequency of around 250MHz.
EP1C6F256I7N Features
185 I/Os
256 LABs/CLBs
100°C gates
598 logic blocks (LABs)
9999 registers
Operating from a frequency of 320.1MHz
EP1C6F256I7N Applications
There are a lot of Altera EP1C6F256I7N FPGAs applications.
- ADAS
- OpenCL
- Consumer Electronics
- Data Mining
- Embedded Vision
- Security systems
- Distributed Monetary Systems
- Medical imaging
- Audio
- Development Boards and Shields for Microcontrollers
