EP4CGX50CF23I7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | FBGA |
| Surface Mount | YES |
| Number of Pins | 484 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 484 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Subcategory | Field Programmable Gate Arrays |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 484 |
| Number of Outputs | 290 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.32.5V |
| Max Supply Voltage | 1.24V |
| Min Supply Voltage | 1.16V |
| Memory Size | 312.8kB |
| RAM Size | 312.8kB |
| Frequency (Max) | 200MHz |
| Data Rate | 3.125 Gbps |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 49888 |
| Number of Logic Blocks (LABs) | 3118 |
| Speed Grade | 7 |
| Number of Transceivers | 8 |
| Number of GPIO | 290 |
| Height Seated (Max) | 2.4mm |
| Length | 23mm |
| Width | 23mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EP4CGX50CF23I7N Overview
In the FBGA package, you will find fpga chips. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. A fundamental building block contains 49888 logic elements or cells. It is powered from a supply voltage of 1.2V. A Field Programmable Gate Arrays-series FPGA part. With this device, you will be able to make use of 290 outputs. There are a total of 484 terminations. This FPGA module has a RAM si312.8kBe of 312.8kB that is sufficient to make sure that the program is able to run normally. There are 484 pins on this device. When operating with the supply voltage of 1.2V, designers can fully make use of its flexibility. Powered by a 1.21.2/3.32.5V power supply, it can be operated by almost anyone. In this module, 100°C is the maximum operating temperature at which fpga electronics can operate. -40°C should be higher than the operating temperature. This device has a pin count of 484 in fpga semiconductor. There are a total of 3118 logic blocks (LABs) that form the basic building blocks of this program. This FPGA module embeds a memory of 312.8kB available for storing programs and data. The maximum supply voltage it can take is 1.24V. The minimal supply voltage required for it is 1.16V. In this case, the maximum speed of the FPGA is approximately 200MHz. A network of 8 transceivers is used to interface with the physical world and transmit high-speed signals. There are 290 GPIOs in the system that can handle both incoming and outgoing digital signals.
EP4CGX50CF23I7N Features
484 LABs/CLBs
100°C gates
3118 logic blocks (LABs)
290 GPIO
EP4CGX50CF23I7N Applications
There are a lot of Altera EP4CGX50CF23I7N FPGAs applications.
- Industrial,Medical and Scientific Instruments
- Radar and Sensors
- Ecosystem
- Automotive
- Automotive advanced driver assistance systems (ADAS)
- Secure Communication
- Aerospace and Defense
- Enterprise networking
- DO-254
- ASIC prototyping
