EPC1LI20N
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.05mA |
| Organization | 1046496X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Memory Density | 1046496 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2016 |
| Series | EPC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.B.2.A |
| Terminal Finish | MATTE TIN |
| Additional Feature | IT CAN ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.32.00.61 |
| Technology | MOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPC1 |
| JESD-30 Code | S-PQCC-J20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
EPC1LI20N Overview
There is a neat 20-LCC (J-Lead) package that is used in this program.Packaging for the external use of Tray.Qualified to operate within -40°C~85°C.Through OTP, it is programmable.FPGA is fed wFPGAh a voltage of 3V~3.6V 4.5V~5.5V.There is a memory device mounted in Surface Mount position for this device.1Mb is the maximum storage size.To find other similar parts, search for "EPC1".FPGA reuqires a supply voltage of 3.3V.Various functions can be applied to 20 terminations.Using this memory device with a maximum voltage of 3.6V is possible.An operating voltage of 3V is required in order to supply the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.If reflow soldering is being performed, the temperature should not be higher than 245 when soldering should be reflowed.A SERIAL-processing method is used to transfer data through this memory.Memory chips can operate at a voltage no higher than 0.05mA.I think it's important to point out that this is a memory IC that has a 10MHz frequency that can be operated at.A COMMON configuration is used for the memory's I/O.3.3/5V power supplies are recommended.Our product line now includes IT CAN ALSO OPERATE AT 5V SUPPLY in order to provide a better level of service to our customers.This device is part of the EPC series.
EPC1LI20N Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
EPC1LI20N Applications
There are a lot of Intel EPC1LI20N applications of configuration proms for FPGAs.
- Cache memory
- telecommunications
- nonvolatile BIOS memory
- main computer memory
- DVD disk buffer
- hard disk drive (HDD)
- embedded logic
- personal computers
- mainframes
- printers
