EPC1PI8N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| Series | EPC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | 3A991.B.2.A |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.32.00.61 |
| Technology | MOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | EPC1 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.05mA |
| Organization | 1046496X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Memory Density | 1046496 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.318mm |
| Length | 9.398mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
EPC1PI8N Overview
The package uses a neat 8-DIP (0.300, 7.62mm) interface.External packaging for the Tube series.An individual who is qualified to operate within the -40°C~85°C domain.Using OTP, you can program it.FPGA is fed wFPGAh a voltage of 3V~3.6V 4.5V~5.5V.There is a memory device mounted in Through Hole.A maximum of 1Mb bytes of data can be stored.Other related parts can be found by searching "EPC1".The supply voltage is 3.3V.Different types of 8 terminations are available with different functions.Using this memory device with a maximum voltage of 3.6V is possible.If the device needs to be supplied with power, then a minimum voltage of 3V is required.Using CONFIGURATION MEMORY memory chips, this is what you get.The reflow soldering process should be done at a temperature no higher than NOT SPECIFIED.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.For the memory chip to operate, it requires a voltage not exceeding 0.05mA.FPGA is a 10MHz-frequency memory IC.A COMMON configuration is used for the memory's I/O.A power supply that is rated at 3.3/5V is recommended for use with this product.The inclusion of IT CAN ALSO OPERATE AT 5V SUPPLY will help customers better meet their needs.Memory is one of the EPC series devices.
EPC1PI8N Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
EPC1PI8N Applications
There are a lot of Intel EPC1PI8N applications of configuration proms for FPGAs.
- printers
- supercomputers
- Cache memory
- hard disk drive (HDD)
- data buffer
- main computer memory
- DVD disk buffer
- multimedia computers
- telecommunications
- mainframes
