banner_page

EPC2LC20N

Surface Mount 1.6Mb Mb Tube Configuration Proms for FPGAs 3 (168 Hours) In System Programmable EPC Obsolete EPC2 compliant


  • Manufacturer: Intel
  • Nocochips NO: 386-EPC2LC20N
  • Package: 20-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 695
  • Description: Surface Mount 1.6Mb Mb Tube Configuration Proms for FPGAs 3 (168 Hours) In System Programmable EPC Obsolete EPC2 compliant (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 20-LCC (J-Lead)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tube
Published 2014
Series EPC
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Additional Feature IT CAN ALSO OPERATE AT 5V SUPPLY
HTS Code 8542.32.00.51
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 3V~3.6V 4.75V~5.25V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Reach Compliance Code compliant
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number EPC2
JESD-30 Code S-PQCC-J20
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 3V
Programmable Type In System Programmable
Memory Size 1.6Mb
Operating Mode SYNCHRONOUS
Clock Frequency 12.5MHz
Supply Current-Max 0.05mA
Organization 1695680X1
Memory Width 1
Standby Current-Max 0.0001A
Memory Density 1695680 bit
Parallel/Serial SERIAL
Memory IC Type CONFIGURATION MEMORY
Height Seated (Max) 4.572mm
Length 8.9662mm
Width 8.9662mm
RoHS Status RoHS Compliant

EPC2LC20N Overview


The package uses a neat 20-LCC (J-Lead) interface.The external packaging of Tube is made of Tube plastic.As a qualified employee, I can operate within 0°C~70°C.Through In System Programmable, it is programmable.A voltage of 3V~3.6V 4.75V~5.25V is applied to it in order to power it.Mounted in Surface Mount is this memory device.There is a limit of 1.6Mb MB for the amount of data that can be stored.In addition to this part, you can search "EPC2" for other similar parts.3.3V is the voltage it requires as a supply.With different functions, 20 terminations can be used.3.6V is the maximum voltage that can be used with this memory device.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.The memory chip in question is a CONFIGURATION MEMORY memory chip.If reflow soldering is being performed, the temperature should not be higher than 245 when soldering should be reflowed.SERIAL-processing is used to transmit data through this memory using the SERIAL-processing algorithm.The memory chip is allowed to operate from a voltage no higher than 0.05mA.I think it's important to point out that this is a memory IC that has a 12.5MHz frequency that can be operated at.Memory is recommended to use a 3.3/5V power supply.Therefore, IT CAN ALSO OPERATE AT 5V SUPPLY is included in order to better meet customer needs.Memory is one of the EPC series devices.More specifically, it can be considered to be a kind of Flash Memories.

EPC2LC20N Features


Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.

EPC2LC20N Applications


There are a lot of Intel EPC2LC20N applications of configuration proms for FPGAs.

  • graphics card
  • main computer memory
  • servers
  • personal computers
  • eDRAM
  • Cache memory
  • printers
  • DVD disk buffer
  • Camcorders
  • telecommunications

Write a review

Note: HTML is not translated!
    Bad           Good