EPC2TI32
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | EPC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | IT CAN ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | EPC2 |
| JESD-30 Code | S-PQFP-G32 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 1.6Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 12.5MHz |
| Supply Current-Max | 0.05mA |
| Organization | 1695680X1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 1695680 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
EPC2TI32 Overview
This package is based on a neat 32-TQFP package which is used by it.Packaging for the external environment.An individual who is qualified to operate within the -40°C~85°C domain.With the help of In System Programmable, it can be programmed.An electric current of 3V~3.6V 4.5V~5.5V is applied to it.Surface Mount is the orientation of this memory device.1.6Mb is the maximum storage size.Try searching "EPC2" for more parts.The supply voltage is 3.3V.A termination with different functions in the 32 axis.FPGA is possible to use this memory device at a maximum voltage of 3.6V.To supply the device, a minimum voltage of 3V is a must.A CONFIGURATION MEMORY memory chip like this is used for data storage.If reflow soldering is being performed, the temperature should not be higher than 235 when soldering should be reflowed.In this memory, data is transmitted using the SERIAL process.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.05mA.I would like to mention that this is a memory IC that will be able to work at a 12.5MHz frequency, so I will mention that.Memory is recommended to use a 3.3/5V power supply.Thus, IT CAN ALSO OPERATE AT 5V SUPPLY is included to better serve customers.A EPC series device, it belongs to the EPC family.I think of it as a sort of Flash Memories.
EPC2TI32 Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
EPC2TI32 Applications
There are a lot of Intel EPC2TI32 applications of configuration proms for FPGAs.
- eDRAM
- networks
- personal digital assistants
- embedded logic
- data buffer
- main computer memory
- workstations,
- servers
- graphics card
- cell phones
