EPCQ128SI16N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 16MB |
| Operating Supply Current | 100μA |
| Memory Type | FLASH |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.02mA |
| Frequency (Max) | 50MHz |
| Organization | 128MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 134217728 bit |
| Parallel/Serial | SERIAL |
| Endurance | 100000 Write/Erase Cycles |
| Write Cycle Time-Max (tWC) | 8ms |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPCQ128SI16N Overview
FPGA uses a neat SOIC package.16MB is the maximum storage size.The supply voltage should be 3.3V.FPGA is possible to connect different functions on the 16 axis at different terminations.The temperature should be kept below 260 in reflow soldering.FPGA is equipped wFPGAh 16 pins.Data is transmitted in this memory using a SERIAL process.Memory chips can operate at a voltage no higher than 0.02mA.Parts include 16 pins.I think it's important to point out that this is a memory IC that has a 20MHz frequency that can be operated at.Using 3.3V on the part before use will help the part run safely and reliably in a circuit.Memory is also called a FLASH memory.For applications involving Surface Mount, it is suitable.There is a possibility of operating the device at a temperature as low as -40°C.There should be no more than 85°C degrees of ambient temperature for it to operate.I recommend a voltage of at least 2.7V for it to run.Memory is rated 3.6V for maximum supply voltage.Using 100μA, it operates.
EPCQ128SI16N Features
SERIAL processing.
FLASH memory
EPCQ128SI16N Applications
There are a lot of Altera EPCQ128SI16N applications of configuration proms for FPGAs.
- eDRAM
- embedded logic
- servers
- Camcorders
- main computer memory
- supercomputers
- graphics card
- mainframes
- data buffer
- hard disk drive (HDD)
