EPCQ128SI16N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2018 |
| Series | EPCQ |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPCQ128 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Programmable Type | In System Programmable |
| Memory Size | 128Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.02mA |
| Organization | 128MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 134217728 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | FLASH |
| Programming Voltage | 3.3V |
| Endurance | 100000 Write/Erase Cycles |
| Write Cycle Time-Max (tWC) | 8ms |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
EPCQ128SI16N Overview
This package is based on a neat 16-SOIC (0.295, 7.50mm Width) package which is used by it.External packaging of type Tube.An individual who is qualified to operate within the -40°C~85°C domain.Using In System Programmable, you can program it.The voltage fed to it is 2.7V~3.6V.There is a memory device mounted in Surface Mount position for this device.A data storage size of 128Mb is allowed.For other related parts, search "EPCQ128".3.3V is the voltage it requires as a supply.FPGA is possible to connect different functions on the 16 axis at different terminations.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.It is necessary to supply the device with a minimum voltage of 2.7V.A FLASH memory chip like this is used for data storage.In reflow soldering, the temperature should be controlled to a maximum of 260 degrees during the process.Data is transmitted in this memory using a SERIAL process.The memory chip will not operate at a voltage above 0.02mA.FPGA is a 20MHz-frequency memory IC.You should use a 3/3.3V power supply.This device is part of the EPCQ series.The type of Flash Memories it is is specific.
EPCQ128SI16N Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
FLASH memory IC.
SERIAL processing.
EPCQ128SI16N Applications
There are a lot of Intel EPCQ128SI16N applications of configuration proms for FPGAs.
- workstations,
- networking
- servers
- supercomputers
- embedded logic
- cell phones
- main computer memory
- telecommunications
- mainframes
- DVD disk buffer
