EPCQ64SI16N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 8MB |
| Operating Supply Current | 100μA |
| Memory Type | FLASH |
| Frequency (Max) | 50MHz |
| Organization | 64MX1 |
| Memory Width | 1 |
| Memory Density | 67108864 bit |
| Parallel/Serial | SERIAL |
| Write Cycle Time-Max (tWC) | 8ms |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPCQ64SI16N Overview
The package uses a neat SOIC interface.FPGA is limFPGAed to 8MB bytes for the size of the data storage.FPGA reuqires a supply voltage of 3.3V.With different functions, 16 terminations can be used.In reflow soldering, the temperature should be controlled to a maximum of 260 degrees during the process.FPGA has pins on the 16 axis.With the help of SERIAL-processing, data is sent through this memory.As part of the package, the part comes with a set of 16 pins.Memory is recommended that users apply 3.3V to the part before use in order for Memory to function safely in a circuMemory.Known as a FLASH memory.As low as -40°C is the lowest temperature at which it can operate.There should be no more than 85°C degrees of ambient temperature for it to operate.Memory should have a voltage of at least 2.7V to run.Memory has a max supply voltage rating of 3.6V.Memory operates on 100μA.
EPCQ64SI16N Features
SERIAL processing.
FLASH memory
EPCQ64SI16N Applications
There are a lot of Altera EPCQ64SI16N applications of configuration proms for FPGAs.
- Cache memory
- graphics card
- telecommunications
- servers
- nonvolatile BIOS memory
- networking
- supercomputers
- DVD disk buffer
- printers
- main computer memory
