EPCS16SI8N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPCS |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPCS16 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 16Mb |
| Memory Type | FLASH |
| Operating Mode | SYNCHRONOUS |
| Supply Current-Max | 0.015mA |
| Organization | 16MX1 |
| Memory Width | 1 |
| Memory Density | 16777216 bit |
| Parallel/Serial | SERIAL |
| Endurance | 100000 Write/Erase Cycles |
| Max Junction Temperature (Tj) | 135°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
EPCS16SI8N Overview
There is a neat 8-SOIC (0.154, 3.90mm Width) package that is used in this program.Packaging for external use.Licensed to operate in -40°C~85°C.In System Programmable allows for programmability.With a voltage of 2.7V~3.6V, it is powered.There is a memory device mounted in Surface Mount.A data storage size of 16Mb is allowed.To find other similar parts, search for "EPCS16".Supply voltage 3.3V is required.Different types of 8 terminations are available with different functions.A maximum voltage of 3.6V can be applied to this memory device.3V is the minimum voltage required to supply the device.The temperature should be kept below 260 in reflow soldering.This memory transmit data in the SERIAL process way.The memory chip is allowed to operate from a voltage no higher than 0.015mA.The use of 3.3V power supplies is recommended.Devices in the EPCS series include this one.There is a memory type that is known as a FLASH memory.Using the switching controller, you will be able to move the slider at a frequency of 40MHz.
EPCS16SI8N Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
SERIAL processing.
FLASH memory
Frequency: 40MHz.
EPCS16SI8N Applications
There are a lot of Intel EPCS16SI8N applications of configuration proms for FPGAs.
- mainframes
- graphics card
- main computer memory
- servers
- supercomputers
- workstations,
- networking
- DVD disk buffer
- Camcorders
- personal computers
