EPCS1SI8N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Published | 2001 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Interface | Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 128kB |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 15mA |
| Memory Type | FLASH |
| Frequency (Max) | 40MHz |
| Organization | 1MX1 |
| Standby Current-Max | 0.00005A |
| Endurance | 100000 Write/Erase Cycles |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPCS1SI8N Overview
The package uses a neat SOIC interface.Data storage is limited to 128kB bytes.3.3V is the required supply voltage.8 terminations with different functions.Reflow soldering should be done at no higher than 260 degrees.FPGA is equipped wFPGAh 8 pins.With the part are included 8 pins.In order for the part to function safely and reliably as part of a circuit, 3.3V recommends that users apply 3.3V to the part prior to use in order to ensure that it will work properly.Memory is also referred to as a FLASH memory.In other words, it is suitable for applications using the Surface Mount operating system.There is a frequency of 20MHz that is used by the switching controller.There is a capability of operating it at temperatures as low as -40°C, which is extremely low.Temperatures above 85°C are not recommended for it to operate.Memory should be running on at least 2.7V voltage.A 3.6V rating is given to its maximum supply voltage.The system operates on the 50μA axis.
EPCS1SI8N Features
FLASH memory
Frequency: 20MHz.
EPCS1SI8N Applications
There are a lot of Altera EPCS1SI8N applications of configuration proms for FPGAs.
- networking
- cell phones
- supercomputers
- eDRAM
- telecommunications
- multimedia computers
- embedded logic
- hard disk drive (HDD)
- eSRAM
- DVD disk buffer
