EPCS4SI8N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Interface | Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 512kB |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 15mA |
| Memory Type | FLASH |
| Frequency (Max) | 40MHz |
| Organization | 4MX1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 4194304 bit |
| Endurance | 100000 Write/Erase Cycles |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPCS4SI8N Overview
There is a neat SOIC package that is used in this program.FPGA is limFPGAed to 512kB bytes for the size of the data storage.FPGA reuqires a supply voltage of 3.3V.FPGA is possible to connect different functions on the 8 axis at different terminations.Reflow soldering should be done at 260°C maximum.FPGA is equipped wFPGAh 8 pins.In the package, you will find a set of 8 pins.The 3.3V company recommends that users apply 3.3V to a part before using it so the part will be able to run safely and reliably in a circuit.Memory is also referred to as a FLASH memory.In terms of Surface Mount applications, this is a suitable product.A swicthing controller operates at a frequency of 20MHz.A temperature of -40°C can be reached by the device and it is still capable of functioning.Memory should operate wMemoryh ambient temperature no higher than 85°C.Memory should have a voltage of at least 2.7V to run.Considering the maximum supply voltage, it is rated 3.6V.The system operates on the 50μA axis.
EPCS4SI8N Features
FLASH memory
Frequency: 20MHz.
EPCS4SI8N Applications
There are a lot of Altera EPCS4SI8N applications of configuration proms for FPGAs.
- nonvolatile BIOS memory
- servers
- personal digital assistants
- supercomputers
- networks
- workstations,
- mainframes
- eSRAM
- printers
- networking
