banner_page

EPCS4SI8N

Surface Mount 4MB Mb Tube Configuration Proms for FPGAs 3 (168 Hours) In System Programmable EPCS Obsolete EPCS4 compliant


  • Manufacturer: Intel
  • Nocochips NO: 386-EPCS4SI8N
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 184
  • Description: Surface Mount 4MB Mb Tube Configuration Proms for FPGAs 3 (168 Hours) In System Programmable EPCS Obsolete EPCS4 compliant (Kg)

Details

Tags

Parameters
Packaging Tube
Published 2010
Series EPCS
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code 3A991.B.1.B.1
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
HTS Code 8542.32.00.51
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Reach Compliance Code compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number EPCS4
JESD-30 Code R-PDSO-G8
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 3V
Programmable Type In System Programmable
Memory Size 4MB
Operating Mode SYNCHRONOUS
Clock Frequency 20MHz
Supply Current-Max 0.015mA
Organization 4MX1
Memory Width 1
Standby Current-Max 0.00005A
Memory Density 4194304 bit
Parallel/Serial SERIAL
Memory IC Type CONFIGURATION MEMORY
Endurance 100000 Write/Erase Cycles
Height Seated (Max) 1.75mm
Length 4.9mm
Width 3.9mm
RoHS Status RoHS Compliant
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C

EPCS4SI8N Overview


The package uses a neat 8-SOIC (0.154, 3.90mm Width) interface.External packaging for the Tube series.Licensed to operate in -40°C~85°C.Through In System Programmable, it is programmable.The voltage is 2.7V~3.6V.Surface Mount is the orientation of this memory device.There is a limit to the size of data storage of 4MB bytes.Other related parts can be found by searching "EPCS4".3.3V is the voltage it requires as a supply.A termination with different functions in the 8 axis.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.Minimum voltage 3V is required for the device to work.Using the CONFIGURATION MEMORY memory chip, we can store data.FPGA is recommended that the reflow soldering temperature be maintained at no more than 260 during the process.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.A memory chip can operate at a voltage no greater than 0.015mA.There is a memory IC in this package that works at 20MHz frequencies.The use of a 3.3V power supply is recommended in order to achieve best results.A EPCS series device, it belongs to the EPCS family.Specifically, It is a kind of Flash Memories.

EPCS4SI8N Features


Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.

EPCS4SI8N Applications


There are a lot of Intel EPCS4SI8N applications of configuration proms for FPGAs.

  • mainframes
  • Cache memory
  • nonvolatile BIOS memory
  • printers
  • Camcorders
  • workstations,
  • supercomputers
  • personal computers
  • embedded logic
  • main computer memory

Write a review

Note: HTML is not translated!
    Bad           Good