EPF10K10ATC144-1N
| Parameters | |
|---|---|
| Series | FLEX-10KA® |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPF10K10 |
| JESD-30 Code | S-PQFP-G144 |
| Number of Outputs | 102 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.33.3V |
| Number of I/O | 102 |
| Clock Frequency | 80MHz |
| Propagation Delay | 0.5 ns |
| Number of Inputs | 102 |
| Programmable Logic Type | LOADABLE PLD |
| Number of Logic Elements/Cells | 576 |
| Total RAM Bits | 6144 |
| Number of Gates | 31000 |
| Number of LABs/CLBs | 72 |
| Output Function | REGISTERED |
| Number of Logic Cells | 576 |
| Number of Dedicated Inputs | 4 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
EPF10K10ATC144-1N Overview
As part of the 144-LQFP package, it is included. There are LOADABLE PLD transistors in this type of FPGA. Fpga chips is programmed wFpga chipsh 102 I/Os for transferring data in a more coherent manner. To form a fundamental building block, there are 576 logic elements/cells. In order for the device to operate, a supply voltage of 3.3V volts needs to be provided. An FPGA part from the Field Programmable Gate Arrays family. By attaching the Surface Mount connector, you can use this FPGA module with your development board. There is a 3V~3.6V-volt supply voltage required for the device to operate. FPGAs belonging to the FLEX-10KA? series are a type of FPGA that belong to the FLEX-10KA? series of FPGAs. As far as the operating temperature is concerned, it should be kept within 0°C~70°C TA when operating. With this device, you will be able to make use of 102 outputs. Using the Tray layout, this FPGA model can be contained in a very small amount of space. In total, there are a total of 144 terminations on fpga chips. There are 6144 RAM bits that are available with this device. Its base part number EPF10K10 can be used to find related parts. A total of 72 LABs/CLBs make up this FPGA array. This is a battery operated device that operates on 2.5/3.33.3V. Among its basic building blocks, there are 31000 gates that are included in it. Typically, fpga semiconductor uses a crystal oscillating at 80MHz . In order for the building block to work, fpga semiconductor consists of 576 logic cells. To determine the status of the input signals, 4 dedicated inputs are available in the system.
EPF10K10ATC144-1N Features
102 I/Os
Up to 6144 RAM bits
EPF10K10ATC144-1N Applications
There are a lot of Intel EPF10K10ATC144-1N FPGAs applications.
- Automation
- Aircraft navigation
- Image processing
- Data Center
- Medical ultrasounds
- Wireless Communications
- Distributed Monetary Systems
- Security systems
- Automotive Applications
- Cryptography
