EPM1270F256C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Series | MAX® II |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | TIN LEAD |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM1270 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 212 |
| Propagation Delay | 6.2 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 6.2ns |
| Number of Logic Elements/Blocks | 1270 |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
EPM1270F256C3 Overview
There are 980 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 212 I/O ports.256terminations have been programmed into the device.Its terminal position is BOTTOM.A voltage of 2.5V is used as the power supply for this device.It is a part of the family [0].It is recommended to package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the MAX? IIseries of FPGAs.It is also possible to find IT CAN ALSO OPERATE AT 3.3Vwhen using this device.In accordance with the [0], its related parts are listed.1270logic blocks/elements are present.The system runs on a power supply of 1.5/3.32.5/3.3V watts.In this case, the maximum supply voltage (Vsup) is 2.625V.There should be a higher supply voltage (Vsup) than 2.375V.
EPM1270F256C3 Features
256-BGA package
212 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.32.5/3.3V power supplies
EPM1270F256C3 Applications
There are a lot of Intel EPM1270F256C3 CPLDs applications.
- Page register
- State machine control
- Power up sequencing
- DMA control
- Complex programmable logic devices
- D/T registers and latches
- Software-Driven Hardware Configuration
- Power automation
- Configurable Addressing of I/O Boards
- Address decoding
