EPM1270F256C3N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 212 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 6.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.8mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270F256C3N Overview
Currently, there are 980 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a FBGA package.There are 212 I/Os programmed in it.The device is programmed with 256 terminations.This electrical part has a terminal position of BOTTOMand is connected to the ground.Power is supplied by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.Bulkis the packaging method.It has 256pins programmed.For high efficiency, the supply voltage should be maintained at [0].In this case, FLASHwill be used to store the data.A Surface Mountis mounted on this electronic component.The pins are [0].A maximum voltage of 3.6Vis required for operation.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.In total, there are 212programmable I/Os.There can be 304MHz frequency achieved.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be lower than 85°C.In total, it contains 127 logic blocks (LABs).In order to form a fundamental building block, there are 1270 logic elements or cells.The maximum frequency should not exceed 304MHz.Devices contain a 1kBmemory for storing data and programs.
EPM1270F256C3N Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270F256C3N Applications
There are a lot of Altera EPM1270F256C3N CPLDs applications.
- Timing control
- State machine design
- Auxiliary Power Supply Isolated and Non-isolated
- Software-Driven Hardware Configuration
- Portable digital devices
- USB Bus
- I/O expansion
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Handheld digital devices
- Cross-Matrix Switch
