EPM1270F256C4
| Parameters | |
|---|---|
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 212 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
EPM1270F256C4 Overview
There are 980 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a FBGA package containing it.In this case, there are 212 I/Os programmed.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 2.5V.There is a part in the family [0].Package the chip by Bulk.It has 256pins programmed.It is also possible to find IT CAN ALSO OPERATE AT 3.3Vwhen using this device.High efficiency requires the supply voltage to be maintained at [0].In order to store data, FLASHis used.Surface Mountmounts this electronic component.It is designed with 256 pins.A voltage of 3.6V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.A total of 212programmable I/Os are available.It is possible to achieve a frequency of 2.3148GHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 85°C.Its basic building block is composed of 127 logic blocks (LABs).In order to form a fundamental building block, there are 1270 logic elements or cells.It should be below 304MHzat the maximal frequency.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM1270F256C4 Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270F256C4 Applications
There are a lot of Altera EPM1270F256C4 CPLDs applications.
- I/O PORTS (MCU MODULE)
- White goods (Washing, Cold, Aircon ,...)
- Software-Driven Hardware Configuration
- State machine control
- Handheld digital devices
- Digital multiplexers
- Software-driven hardware configuration
- I2C BUS INTERFACE
- Power automation
- High speed graphics processing
