EPM1270F256C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Termination | SMD/SMT |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 212 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270F256C4N Overview
A mobile phone network consists of 980macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).There is a FBGA package containing it.The device is programmed with 212 I/O ports.The termination of a device is set to [0].BOTTOMis the terminal position of this electrical part.It is powered by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Bulk.There are 256pins on the chip.This device can also display [0].It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.The device has a pinout of [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.The minimal supply voltage is 2.375V.A programmable I/O count of 212 has been recorded.There is 304MHz frequency that can be achieved.Ideally, the operating temperature should be greater than 0°C.It is recommended to keep the operating temperature below 85°C.The logic block consists of 127 l logic blocks (LABs).Basic building blocks have 1270logic elements.It should be below 304MHzat the maximal frequency.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM1270F256C4N Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270F256C4N Applications
There are a lot of Altera EPM1270F256C4N CPLDs applications.
- Page register
- Custom state machines
- Reset swapping
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Timing control
- LED Lighting systems
- I2C BUS INTERFACE
- Configurable Addressing of I/O Boards
- Synchronous or asynchronous mode
- Handheld digital devices
