EPM1270F256I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 212 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270F256I5 Overview
This network has 980macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the FBGApackage, you will find it.It is programmed with 212 I/Os.The termination of a device is set to [0].This electrical component has a terminal position of 0.It is powered from a supply voltage of 2.5V.It is a part of the family [0].It is recommended that the chip be packaged by Bulk.It has 256pins programmed.The device can also be used to find [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].It is mounted by Surface Mount.A total of 256pins are provided on this board.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 2.375Vis required.A total of 212 Programmable I/Os are available.You can achieve 1.8797GHzfrequencies.It is recommended that the operating temperature exceed -40°C.A temperature lower than 100°Cis recommended for operation.The program consists of 127 logic blocks (LABs).A fundamental building block consists of 1270logic elements/cells.The maximum frequency should not exceed 304MHz.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM1270F256I5 Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270F256I5 Applications
There are a lot of Altera EPM1270F256I5 CPLDs applications.
- Multiple Clock Source Selection
- State machine control
- Programmable power management
- Configurable Addressing of I/O Boards
- Code converters
- LED Lighting systems
- Dedicated input registers
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Address decoders
- Programmable polarity
