EPM1270GF256C3
| Parameters | |
|---|---|
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 212 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 6.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
EPM1270GF256C3 Overview
There are 980 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 212 I/Os.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 1.8Vprovides power to the device.The part belongs to Programmable Logic Devices family.It is recommended to package the chip by Bulk.It is programmed with 256 pins.If this device is used, you will also be able to find [0].High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].This device is mounted by Surface Mount.The 256pins are designed into the board.A maximum voltage of 1.89Vis required for operation.A minimum supply voltage of 1.71V is required for it to operate.A programmable I/O count of 212 has been recorded.A frequency of 3.01205GHzcan be achieved.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be lower than 85°C.In its simplest form, it consists of 127 logic blocks (LABs).An elementary building block consists of 1270logic elements/cells.It should be below 304MHzat the maximal frequency.These devices are capable of storing programs and data in 1kBmemory.
EPM1270GF256C3 Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270GF256C3 Applications
There are a lot of Altera EPM1270GF256C3 CPLDs applications.
- Power automation
- Power up sequencing
- Programmable polarity
- ON-CHIP OSCILLATOR CIRCUIT
- Synchronous or asynchronous mode
- Configurable Addressing of I/O Boards
- DMA control
- Digital systems
- Parity generators
- Interface bridging
