EPM1270GF256C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 212 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 1270 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270GF256C4 Overview
A mobile phone network consists of 980macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the FBGA package.The device has 212inputs and outputs.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of BOTTOM.The power source is powered by 1.8Vvolts.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Bulk.There are 256 pins on the chip.When using this device, YESis also available.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].In this case, it is mounted by Surface Mount.256pins are included in its design.A voltage of 1.89V is the maximum supply voltage for this device.It is powered by 1.71Vas its minimum supply voltage.A programmable I/O count of 212 has been recorded.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 85°C.In total, it contains 1270 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM1270GF256C4 Features
FBGA package
212 I/Os
256 pin count
256 pins
1270 logic blocks (LABs)
EPM1270GF256C4 Applications
There are a lot of Altera EPM1270GF256C4 CPLDs applications.
- Power up sequencing
- Digital systems
- I/O PORTS (MCU MODULE)
- PLC analog input modules
- Custom shift registers
- Parity generators
- Pattern recognition
- INTERRUPT SYSTEM
- Dedicated input registers
- Software-driven hardware configuration
