EPM1270GF256C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 212 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270GF256C4N Overview
980macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a FBGA package.The device is programmed with 212 I/Os.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is supplied by a voltage of 1.8V volts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Bulk.A chip with 256pins is programmed.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.256pins are included in its design.It operates at a maximum supply voltage of 1.89V volts.In order for it to operate, a supply voltage of 1.71Vis required.Programmable I/Os are counted up 212.This frequency can be achieved at 2.3148GHz.Ideally, the operating temperature should be greater than 0°C.It is recommended to keep the operating temperature below 85°C.127logic blocks (LABs) make up this circuit.There are 1270 logic elements/cells on the device.It is recommended that the maximal frequency be lower than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM1270GF256C4N Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270GF256C4N Applications
There are a lot of Altera EPM1270GF256C4N CPLDs applications.
- USB Bus
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Synchronous or asynchronous mode
- DMA control
- ROM patching
- TIMERS/COUNTERS
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Programmable polarity
- DDC INTERFACE
