EPM1270GF256I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 212 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270GF256I5 Overview
In the mobile phone network, there are 980macro cells, which are cells with high-power antennas and towers.You can find it in package [0].There are 212 I/Os programmed in it.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 1.8V volts.It is included in Programmable Logic Devices.Chips are programmed with 256 pins.It is also possible to find YESwhen using this device.Optimal efficiency requires a supply voltage of [0].Data is stored using [0].Surface Mountis used to mount this electronic component.The device is designed with pins [0].This device operates at a voltage of 1.89Vas its maximum supply voltage.It operates with the minimal supply voltage of 1.71V.A total of 212Programmable I/Os are present.You can achieve 1.8797GHzfrequencies.The operating temperature should be higher than -40°C.Temperatures should not exceed 100°C.Its basic building block is composed of 127 logic blocks (LABs).An elementary building block consists of 1270logic elements/cells.It should be below 304MHzat the maximal frequency.The devices embed a memory of 1kB available for storing programs and datas.
EPM1270GF256I5 Features
FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270GF256I5 Applications
There are a lot of Altera EPM1270GF256I5 CPLDs applications.
- Reset swapping
- Cross-Matrix Switch
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Programmable power management
- Parity generators
- Random logic replacement
- Auxiliary Power Supply Isolated and Non-isolated
- DMA control
- USB Bus
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
