EPM1270GM256I5N
| Parameters | |
|---|---|
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Number of Macro Cells | 980 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TFBGA |
| Number of Pins | 256 |
| Published | 2003 |
| Part Status | Active |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Frequency | 1.8797GHz |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
EPM1270GM256I5N Overview
Currently, there are 980 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A TFBGA package contains the item.High efficiency requires a voltage supply of [0].FLASH is adopted for storing data.Surface Mountis the mounting point of this electronic part.There are 256pins on it.In this case, the maximum supply voltage is 1.89V.The device is designed to operate with a minimal supply voltage of 1.71VV.In total, there are 212programmable I/Os.There is 1.8797GHz frequency that can be achieved.It is recommended that the operating temperature be greater than -40°C.The operating temperature should be lower than 100°C.In its simplest form, it consists of 127 logic blocks (LABs).There are 1270 logic elements/cells to form a fundamental building block. It is recommended that the maximum frequency is less than 0.Devices contain a 1kBmemory for storing data and programs.
EPM1270GM256I5N Features
TFBGA package
256 pins
127 logic blocks (LABs)
EPM1270GM256I5N Applications
There are a lot of Altera EPM1270GM256I5N CPLDs applications.
- Parity generators
- Timing control
- I/O PORTS (MCU MODULE)
- DMA control
- D/T registers and latches
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Software-driven hardware configuration
- Complex programmable logic devices
- Synchronous or asynchronous mode
- POWER-SAVING MODES
