EPM1270GT144C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270GT144C4 Overview
A mobile phone network consists of 980macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A TQFP package contains the item.There are 116 I/Os on the board.It is programmed that device terminations will be 144 .This electrical part has a terminal position of QUADand is connected to the ground.The power source is powered by 1.8Vvolts.It is a part of family [0].Bulkshould be used to package the chip.It has 144pins programmed.This device can also display [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].This device operates at a voltage of 1.89V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 1.71V.There are 116 Programmable I/Os.A frequency of 2.3148GHzcan be achieved.There should be a temperature above 0°Cat the time of operation.A temperature below 85°Cshould be used as the operating temperature.It consists of 127 logic blocks (LABs).In order to form a fundamental building block, there are 1270 logic elements or cells.There should be a lower maximum frequency than 304MHz.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM1270GT144C4 Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270GT144C4 Applications
There are a lot of Altera EPM1270GT144C4 CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Timing control
- Reset swapping
- Page register
- Software-driven hardware configuration
- Power automation
- Digital designs
- Digital multiplexers
- LED Lighting systems
- Battery operated portable devices
