EPM1270GT144C5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270GT144C5 Overview
In the mobile phone network, there are 980macro cells, which are cells with high-power antennas and towers.It is contained in package [0].There are 116 I/Os programmed in it.There is a 144terminations set on devices.This electrical component has a terminal position of 0.It is powered from a supply voltage of 1.8V.It belongs to the family [0].It is packaged in the way of Bulk.A chip with 144pins is programmed.Additionally, this device is capable of displaying [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].FLASH is adopted for storing data.Surface Mountis used to mount this electronic component.There are 144pins on it.It operates with the maximal supply voltage of 1.89V.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.There are 116 Programmable I/Os.There is a maximum frequency of 1.8797GHz.There should be a temperature above 0°Cat the time of operation.A temperature lower than 85°Cis recommended for operation.The system consists of 127 logic blocks (LABs).In order to form a fundamental building block, there are 1270logic elements/cells.A maximum frequency of less than 304MHzis recommended.These devices are capable of storing programs and data in 1kBmemory.
EPM1270GT144C5 Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270GT144C5 Applications
There are a lot of Altera EPM1270GT144C5 CPLDs applications.
- Multiple Clock Source Selection
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- DMA control
- Storage Cards and Storage Racks
- ON-CHIP OSCILLATOR CIRCUIT
- DDC INTERFACE
- TIMERS/COUNTERS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Portable digital devices
- Auxiliary Power Supply Isolated and Non-isolated
