EPM1270GT144C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270GT144C5N Overview
980macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A TQFP package contains the item.This device has 116 I/O ports programmed into it.144terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 1.8V volts.There is a part in the family [0].Bulkshould be used to package the chip.The chip is programmed with 144 pins.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.Data storage is performed using [0].The electronic part is mounted by Surface Mount.144pins are included in its design.It operates at a maximum supply voltage of 1.89V volts.It operates with the minimal supply voltage of 1.71V.The frequency that can be achieved is 304MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 85°C.There are 127 logic blocks (LABs) in its basic building block.A fundamental building block of logic consists of 1270logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.It is possible to store data and programs in the devices' 1kBmemory.
EPM1270GT144C5N Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270GT144C5N Applications
There are a lot of Altera EPM1270GT144C5N CPLDs applications.
- Software-driven hardware configuration
- Digital multiplexers
- I/O expansion
- Cross-Matrix Switch
- STANDARD SERIAL INTERFACE UART
- DMA control
- Bootloaders for FPGAs
- Programmable power management
- State machine control
- I2C BUS INTERFACE
