EPM1270M256C5N
| Parameters | |
|---|---|
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.05mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Termination | SMD/SMT |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 212 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
EPM1270M256C5N Overview
There are 980 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 212 I/Os on the board.Terminations of devices are set to [0].This electrical part has a terminal position of BOTTOMand is connected to the ground.A voltage of 2.5Vprovides power to the device.The part is included in Programmable Logic Devices.There are 256 pins on the chip.If this device is used, you will also be able to find [0].For high efficiency, the supply voltage should be maintained at [0].In order to store data, FLASHis used.This electronic part is mounted in the way of Surface Mount.This board has 256 pins.There is a maximum supply voltage of 3.6Vwhen the device is operating.It is powered by 2.375Vas its minimum supply voltage.A total of 212programmable I/Os are available.In this case, 304MHzis the frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be lower than 85°C.The logic block consists of 127 l logic blocks (LABs).Basic building blocks have 1270logic elements.It is recommended that the maximal frequency be less than 0.It is possible to store data and programs in the devices' 1kBmemory.
EPM1270M256C5N Features
BGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270M256C5N Applications
There are a lot of Altera EPM1270M256C5N CPLDs applications.
- Address decoders
- Digital systems
- Cross-Matrix Switch
- Code converters
- STANDARD SERIAL INTERFACE UART
- Field programmable gate
- High speed graphics processing
- Auxiliary Power Supply Isolated and Non-isolated
- Protection relays
- USB Bus
