Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
BGA |
Number of Pins |
256 |
Published |
2003 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
256 |
ECCN Code |
3A991 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Operating Temperature |
100°C |
Min Operating Temperature |
-40°C |
Additional Feature |
IT CAN ALSO OPERATE AT 3.3V |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Frequency |
1.8797GHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
256 |
Operating Supply Voltage |
3.3V |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.375V |
Memory Size |
1kB |
Operating Supply Current |
55mA |
Number of I/O |
212 |
Nominal Supply Current |
55mA |
Memory Type |
FLASH |
Propagation Delay |
10 ns |
Turn On Delay Time |
10 ns |
Frequency (Max) |
304MHz |
Number of Logic Elements/Cells |
1270 |
Number of Programmable I/O |
212 |
Number of Logic Blocks (LABs) |
127 |
Speed Grade |
5 |
Output Function |
MACROCELL |
Number of Macro Cells |
980 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height |
1mm |
Length |
11mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
EPM1270M256I5N Overview
980 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a BGA package containing it.The device is programmed with 212 I/O ports.There are 256 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 2.5V voltage supply for this device.It is a part of the family [0].There are 256 pins on the chip.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.There are 256 pins on the device.With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 2.375Vis required.Currently, there are 212 Programmable I/Os available.This frequency is 1.8797GHz.It is recommended that the operating temperature be greater than -40°C.The operating temperature should be lower than 100°C.There are 127 logic blocks (LABs) in its basic building block.In order to form a fundamental building block, there are 1270logic elements/cells.A maximum frequency of less than 304MHzis recommended.Using the devices' 1kBmemory, programs and data can be stored.
EPM1270M256I5N Features
BGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270M256I5N Applications
There are a lot of Altera EPM1270M256I5N CPLDs applications.
- Wide Vin Industrial low power SMPS
- ToR/Aggregation/Core Switch and Router
- State machine design
- Dedicated input registers
- DMA control
- I/O expansion
- High speed graphics processing
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Power up sequencing
- Synchronous or asynchronous mode