EPM1270T144A5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM1270T144A5N Overview
Currently, there are 980 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the TQFPpackage, you will find it.There are 116 I/Os programmed in it.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 2.5V.It is included in Programmable Logic Devices.The chip is programmed with 144 pins.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.The pins are [0].A maximum supply voltage of 3.6Vis used in its operation.In order for it to operate, a supply voltage of 2.375Vis required.There are 116 programmable I/Os in this system.A frequency of 1.8797GHzcan be achieved.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 125°C.There are 127logic blocks (LABs) that make up its basic building block.A fundamental building block of logic consists of 1270logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM1270T144A5N Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270T144A5N Applications
There are a lot of Altera EPM1270T144A5N CPLDs applications.
- Parity generators
- Power Meter SMPS
- Digital multiplexers
- DDC INTERFACE
- Software-driven hardware configuration
- Software-Driven Hardware Configuration
- Dedicated input registers
- I2C BUS INTERFACE
- Storage Cards and Storage Racks
- Reset swapping
