EPM1270T144C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270T144C4 Overview
A mobile phone network consists of 980macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the TQFP package.The device has 116inputs and outputs.144terminations have been programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 2.5Vprovides power to the device.This part is in the family [0].It is packaged in the way of Bulk.The chip is programmed with 144 pins.Additionally, this device is capable of displaying [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.There are 144 pins embedded in the device.A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 116 programmable I/Os in this system.This frequency can be achieved at 2.3148GHz.Operating temperatures should be higher than 0°C.There should be a temperature below 85°Cat the time of operation.There are 127logic blocks (LABs) that make up its basic building block.A fundamental building block of logic consists of 1270logic elements/cells.Maximum frequency should be less than 304MHz.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM1270T144C4 Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270T144C4 Applications
There are a lot of Altera EPM1270T144C4 CPLDs applications.
- DDC INTERFACE
- Multiple Clock Source Selection
- Synchronous or asynchronous mode
- Pattern recognition
- Auxiliary Power Supply Isolated and Non-isolated
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Power Meter SMPS
- Wide Vin Industrial low power SMPS
- Address decoding
- D/T registers and latches
